What is a drive away kit?
A drive away kit is a simple product designed to allow an Outdoor Revolution
drive away awning to be erected before you attach it to which ever motorhome
or campervan etc that you drive.
How does it work (see Diagram)
Fiamma/Omnistor Drive away fixing kit OR532.
Designed so one side of the fixing kit slides into the channel at the front
of a Fiamma/Omnistor wind-out awning.
(Fits, Movelite XL Nomad 3, Nomad 2+2, Navigator).
Simply slide the narrower length of twin piping into the channel of the
wind-out awning. Now slide the figure of 8 plastic strips onto the opposite
side of the same twin piping section. The opposite side of the figure 8
simply slides onto the piping sewn onto the back of your awning.
Large fixing Kit, Product Code OR531.
Designed to slide into 6mm awning rail.
(Fits, Movelite XL Nomad 3, Nomad 2+2, Navigator)
Simply slide the length of twin piping into the awning rail. Now slide
the figure of 8 plastic strips onto the opposite side of the same twin
piping section. The opposite side of the figure 8 slides onto the piping
sewn onto the back of your awning.
Small Drive away fixing kit Product Code OR530
(Fits Outdoor Revolution Movelite)
Simply slide the length of twin piping into the awning rail. Now slide the
figure of 8 plastic strips onto the opposite side of the same twin piping
section. The opposite side of the figure 8 slides onto the piping sewn onto
the back of your awning.
What if You do not have any awning rail fitted?
All Outdoor Revolution Drive away awnings are fitted with either
detachable stability straps or guylines (depending on model) that simply go
over the roof of the motorhome and peg in the ground at the opposite side
allowing the ‘tunnel’ to be formed from the awning to the vehicle.
|
